Subsea Tensile Link SUBT-2.0
The Subsea Tensile link is specially designed for working in subsea conditions and is used for measuring tensile loads. With an integral 4-20mA amplifier the Load Cell comes complete with a rugged Peli display case and subsea rated signal cable to customer specific lengths.
Fully sealed with a subsea connector and pressure tested to over 250Bar the Load Cell is the ideal instrument for easily and accurately measuring subsea loads.
Features
- Rugged design
- Optional internal 4-20mA or RS485 Amplifier for longer cable lengths
- Subsea connector and cable
- Designed for standard Fed Spec shackle sizes
Applications
- Subsea moorings
- Subsea vehicle towing tension monitoring
- Anchoring tension monitoring
- Cable recovery/repair
Dimensional Data

Load Capacity (tonnes) | Part Number | Dimensions (mm) | Accuracy FRO | Proof test % Load Capacity | Resolution (kg) | |||||
A | ØB | ØC | D | E | F | |||||
1 | 0001 – 1194 | 215 | 82.5 | 28 | 24 | 145 | 86.5 | ±0.2 | 200 | 1 |
2 | 0001 – 1195 | 215 | 82.5 | 28 | 24 | 145 | 86.5 | ±0.2 | 200 | 1 |
5 | 0001 – 1196 | 215 | 82.5 | 28 | 28 | 145 | 86.5 | ±0.2 | 200 | 2 |
12 | 0001 – 1197 | 240 | 82.5 | 40 | 38 | 150 | 98 | ±0.2 | 200 | 10 |
20 | 0001 – 1198 | 320 | 82.5 | 53 | 48 | 190 | 108 | ±0.2 | 200 | 10 |
25 | 0001 – 1199 | 325 | 82.5 | 53 | 48 | 195 | 120 | ±0.2 | 200 | 10 |
40 | 0001 – 1200 | 410 | 102 | 74 | 50 | 242 | 150 | ±0.2 | 150 | 50 |
50 | 0001 – 1201 | 410 | 102 | 74 | 58 | 234 | 150 | ±0.2 | 150 | 50 |
100 | 0001 – 1202 | 485 | 107 | 99 | 70 | 275 | 180 | ±0.3 | 150 | 100 |
Specification
Link Material | Stainless steel or sheradised steel |
Internal Amplifier | 3 wire 4-20mA / RS485 ASCII / RS485 MODBUS / 0-10V |
Connector | MCBH-3MP-SS Subsea Connector / BH4MP Subsea Connector /4 6.5 MBORA Subsea Connector |
Sealing | Subsea rated with O ring seals - pressure tested to 250Bar |
Operating Temperature | -10°C to +60°C |
Display Unit | Peli Case Enclosure with viewing window as per display’s datasheet / 5 Digit Bright LED display / on/off Switch Tare switch / Mains (240VAC) rechargable / Battery life will give approx. 12+ Hours. |
Cable | Sub-Sea moulded cable. Tensile link end is connected via an over moulded subsea connector/ Display end is connected via a CA connector. |
Calibration | Supplied with calibration, proof load certificates to BS EN 10002/2 1992 and pressure test certificates. |
Packaging | Packaged in custom built wooden case |