Subsea Shackle Load Cell SUBS-2.0
The Subsea Shackle is a High Strength Subsea rated Load Cell manufactured from industry leading Crosby and GN Shackles along with a Stainless Steel Load Pin. The DLM Subsea Shackle is designed for monitoring tensile loads below seawater and is pressure tested to 300 Bar.
The Subsea Shackle can be used with a TW-2.0-S Hand Held Display or alternatively can be fitted with an internal signal conditioner for increased cable lengths paired with a custom display for showing the load and integration with clients existing systems.
Features
- Robust design
- Stainless steel construction
- Subsea connector and cable
- Standard shackle sizes
- Optional internal 4-20mA or RS485 Amplifier for longer cable lengths
- Supplied with load directional bobbin
Applications
- Subsea cable recovery/repair
- Subsea vehicle lifting
- Wave energy generator mooring/tethering
- Offshore wind cable installations
- Bollard pull and certification
- Subsea cable laying
Dimensional Data

Load Capacity (tonnes) | Part Number | Shackle | Dimensions (mm) | Proof load (tonnes) | Accuracy % | Resolution (kg) | ||||||||
A | B | C | D | E | F | G | H | I | ||||||
12 | 0001 – 1203 | Crosby G2130 | 146 | 76 | 31.8 | 35 | 107 | 51.5 | 235 | 100 | 60 | 18 | <±1 | 5 |
25 | 0001 – 1204 | Crosby G2130 | 225 | 106 | 44.5 | 50 | 162 | 73 | 300 | 100 | 86 | 37.5 | <±1 | 10 |
55 | 0001 – 1205 | Crosby G2130 | 327 | 145 | 66.5 | 70 | 246 | 105 | 385 | 100 | 114 | 82.5 | <±1 | 50 |
85 | 0001 – 1206 | GN H9 | 365 | 165 | 76 | 82 | 308 | 127 | 444 | 110 | 130 | 127.5 | ±1 | 100 |
120 | 0001 – 1207 | GN H10 | 416 | 200 | 89 | 95 | 347 | 150 | 493 | 110 | 150 | 180 | ±1 | 100 |
200 | 0001 – 1208 | GN H10 | 530 | 260 | 120 | 125 | 450 | 180 | 600 | 140 | 235 | 300 | ±1 | 100 |
300 | 0001 – 1209 | GN H10 | 565 | 305 | 130 | 150 | 534 | 200 | 640 | 150 | 287 | 350 | ±1 | 100 |
400 | 0001 – 1210 | GN H10 | 655 | 350 | 165 | 175 | 600 | 230 | 720 | 185 | 345 | 185 | ±1 | 100 |
500 | 0001 – 1211 | GN H10 | 710 | 370 | 180 | 185 | 610 | 255 | 780 | 200 | 375 | 750 | ±1 | 100 |
Specification
Pin, Bobbin & nut material | Stainless steel |
Bridge resistance | 350Ω - 1000Ω |
Operating temperature | -20°C to +60°C |
Display | TW-2.0-S Cabled Hand Held Display/ Custom display with internal signal conditioner in load cell increased cable lengths |
Cable Length | 20m as standard with TW-2.0 Display/ 30m+ with internal signal conditioner |
Cable Type | Subsea rated 4 core twisted pair PU2STP cable with over moulded MCIL-4F or IL-4FS with locking rings |
Load Cell Connector | MCBH-4M or BH-4-MP Subsea Connectors |
Sealing | Face and barrel O ring sealed. Pressure tested to 300 Bar |
Calibration | Supplied with calibration and proof load certificates to BS EN 10002/2 1992 |
Packaging | Wooden stowage case for larger capacities |
Signal Processor types | 4-20mA Amplifier / RS485 MODBUS / RS485 ASCII / 0-10v |