Standard Load Pin SLP-2.0


The DLM Standard load pin is manufactured from high tensile 17-4PH H1150D stainless steel fully traceable from European mills. Designed for general use with an emphasis on quality and reliability the Standard Load Pin is suitable for a multitude of industries and applications. Load pins can also be supplied with various electrical outputs for easy interfacing with a host of different instrumentation and displays, along with o-Ring seals and optional encapsulation against vibration and mechanical shock.

Key features

  • Stainless steel construction
  • Minimum of 5:1 safety factor
  • Up to IP68 protection
  • Wide range of electrical outputs


  • Cranes
  • Winches
  • Wide range of electrical outputs
  • Cable tensioners
  • Custom applications
  • Offshore moorings

Product specification

Pin Material: 17/4PH H1150 + 1150 stainless steel
Bridge Resistance: 350Ω - 1000Ω
Accuracy: <1.0% FS
Load Ratings: 1 tonne up to 2000 tonnes
Operating Temperature: -20˚C to +60˚C
Signal conditioner options: mV output / 4-20mA 3 wire amplifier / 4-20mA 2 wire amplifier / RS485 MODBUS signal conditioner / RS485 ASCII signal conditioner / 0-10V Amplifier
Input Voltage: 10V excitation for mV output pin / 12-30VDC for internal amplifiers
Degree of protection: IP67/IP68 with cable gland connection / IP66 for Mil Spec connector option
Connection options: Cable gland and signal cable / Mil Spec connector and signal cable
Locking and fixing arrangements: Keeper slot and lock plate / Anti-rotation bracket / Thread and nut with split pin / Welded bracket
Certification: Supplied with calibration, proof load and test certificates to BS EN ISO 7500-1:2018 and material certification to 3.1 or 3.2 upon request

Related products

Load Pin

Telemetry Load Pin TW-3.0

Find out more

Subsea Load Pin SSLP-2.0

Find out more

Load Pin

Line Tension Load Pin LT-LP

Find out more